SLIDING GATE
Sliding gate is one of the best forms of gates as it does not come in the way of the passage while closing and opening. While swing gates make the accessible space reduced due to the travel area, sliding gates slide along the wall and hence are considered the best.
SWING GATE
Swing gates are best suited for openings that need an economical solution of gating. Hinged on the pillars they are mostly designed with 2 leaves and hence easy to instal and cost effective. Being one of the oldest forms of gate it is very user friendly and needs very less maintenance too.
SLIDING SWING GATE
When the decision is to instal a swing gate and the opening of the swing gate obstructs the pathway or a ramp that is steadily increasing on the side of the swing, swing slding gate design is the best solution. A sliding track and a rotating wheel adds a structured movement system to the gate.
L SHAPED TURNING SLIDING GATE
One of the most challenging designs of gate is a Corner Turning Gate. A lot of care needs to be put while installing a turning gate. The radius at the corner and the measurement of the sections are very vital and only a installer with experience and innovation can do it. Gatemate is proud to have installed many turning gates in chennai which are being serviced.
Telescopic gate
When there is lesser space for a sliding gate to slide one of the solutions would be a Telescopic Gate. The total opening of the gate is divided into two leaves and kept one by the side of the other. As the first gate slides the other one slides faster to reach the destination thereby closing the full opening at the same time. Great care and planning goes behind setting up ofa telescopic gate and GATEMATE is happy to share that it has the expertise to create gate design based on telescopic mechanism and install within just 10 days’ time
SHUTTERS
A regular shutter made out of Mild Steel is what every street shop uses and most ideal and economical for that segment of market. However, providing a car garage with a shutter has to match the aesthetics of the building and hence the need of elegant Galvanised and Aluminium Powder coated shutters.
Galvanised Shutters
Shutter leaves made of galvanised mild steel makes it rust proof. Lesser painting expenses and longer life of shutter are the benefits.
Aluminium Shutters
Shutters made out of aluminium are very elegant and once powder coated they give an imported look. Due to the lighter weight it is also lesser in movement noise. Lighter and easy to open and close.
Hanging Gate
Hanging gate needs a top channel that arches across the pathway. The arch provides the support for the gate to slide and sail to the other side smoothly. Advantage of a hanging gate is the wheel free design and track free sliding. Gatemate is proud to have acquired skillset to create any challenging gate design.
Sectional Garage Doors
Sectional garage doors are made out of galvanised mild steel shells filled with Polyurethane Foam and powder coated. The finish is truely rich and hence the first choice of the HNI clients. The motorised Sectional Garage Doors moves overhead and slides parallel to the ceiling. Care has to be taken during measurement and planning to accomodate the Sectional Garage Door as any mistake can cost the whole SG Door to be scrapped.
Canilever Gate/ Wheel free gates
Cantilever Gates are gates that dont have wheels at all. They slide from the side of the wall in mid air and get seated on a bracket placed on the other side. Gates that need aesthics and cant afford to have a rail running on the path have to choose the cantilever gate mechanism. Gate Mate has acquired the skill set to do any challenging gate.
Contact Us for service-related enquiries.
© 2021 All Rights Reserved by GateMate.
